ROOT AND AFTER ROOT GUIDE FOR ANDROID[ MTK PHONES]

image

image

image

image

HEY GUYS,
WELCOME TO HUBOinc
TOO MANY USERS ASKING ME ABOUT HOW TO ROOT AND WHAT SHOULD I DO AFTER ROOT….,
SO HERE IN THIS GUIDE I WILL TELL U ABOUT WHAT IS ROOT AND WHY ROOTING WILL SHOW UNKNOWN POTENTIAL OF YOUR DEVICE.
SO LETS START.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
image

∆WHAT IS ROOTING:-
   *GUYS ROOTING IS UNLOCKING THE FULL POWER OF UR DEVICE AND AFTER THIS WARRANTY OF UR DEVICE WILL VOID.
ROOTING OF UR DEVICE WILL GIVE U  100 •/• ACCESS OF UR DEVICE MEANS U CAN USE UR SOFTWARE AND HARDWARE PART OF UR DEVICE AT FULL POTENTIAL.
IN TECHNICAL TERM ROOTING IS UNLOCKING UR DEVICE’S BOOTLOADER WHICH WAS LOCKED BY MANUFACTURER.
WHEN U ROOT UR DEVICE IT MEANS U BREAKED THE LOCK OF BOOT LOADER AND U CAN DO ANYTHING WITH UR DEVICE AT SYSTEM AND ROOT LEVEL.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
∆ HOW TO ROOT :-
  *WELL EVERY DEVICE HAS THEIR DIFFERENT SPECS AND CHIPSET.
THATS WHY ROOTING METHOD IS ALSO DIFER FROM DEVICE BY DEVICE.
BUT HERE I WILL TEACH U ABOUT MEDIATEK PHONES.
IT HAS TWO TYPES OF METHOD.

(1).WITHOUT PC:-
     *USE FRAMAROOT APK (FOR JELLYBEAN PHONES)
→→ open framaroot
        U will see three exploit
         Choose any exploit
          Run it.
          Done.
         Install super su apk.
[LINK:-FRAMAROOT_ALL_VERSIONS]

     *USE KINGROOT APK (FOR KITKAT
PHONES)
→→open kingroot apk
       U will see green circle
        Click on it (net connection required)
        Done.
     Now delete kinguser apk and install super su apk.
[LINK:-KINGROOT_ALL_VERSIONS]

(2).WITH PC:-
    *VIA KINGOROOT
       →one click root
          Just connect ur phone to PC
           Run kingo
           Done.
[LINK:-KINGOROOT_FOR_PC]

   *VIA IROOT
       →SAME PROCESS AS KINGOROOT
[LINK:-IROOT_ALL_VERSIONS]

     *VIA MTK DROID TOOL
       →install mtk adb drivers in ur pc (pdanet or vcom)
           Now open mtk tool
           Connect ur phone to PC
             Mtk tool will recognize ur device
             And show ur device information
               Now click on root button
               Two pop up message will
                appear..click on yes
                 Done.
image

[LINK:-MTK_DROIT_ROOT_TOOL]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
image

∆WHAT TO DO AFTER ROOT:-
  *AFTER ROOT UR DEVICE FIRST THING U HAVE TO DO IS FLASH CUSTOM RECOVERY IN UR DEVICE.
    *NOW DOWNLOAD CUSTOM RECOVERY FOR UR DEVICE.
*INSTALL RASHR APK AND OPEN IT AND CHOOSE RECOVERY FROM SD CARD AND FLASH IT
DONE.
###u can use any other apps to flash recovery in ur phone like FLASHIFY, MOBILE UNCLE TOOL.

ƥWHAT IS CUSTOM REVOVERY:-
  *I WILL NOT GO IN MORE TECHNICAL TERM .IN SIMPLE WORD  CUSTOM RECOVERY IS REPLACEMENT OF YOUR STOCK RECOVERY WITH BETTER ONE.
FROM CUSTOM RECOVERY U CAN DO ANYTHING WITH UR DEVICE THAT STOCK RECOVERY CAN’T DO.
CUSTOM RECOVERY WILL PROVIDE U FULL ADVANCE ENVIRONMENT THAT UR STOCK RECOVERY CANT PROVIDE.
CUSTOM RECOVERY HAS MANY ADVANCED FEATURES LIKE TOUCH SUPPORT, BACKUP FAETURE OF FULL STOCK ROM,INSTALL ZIP OPTION,FULL CONTROL ON WIPEAND MANY MORE.
HERE IS NAME OF SOME FAMOUS CUSTOM RECOVERIES

*CWM
image

*TWRP
image

*CARLIV TOUCH RECOVERY
image

*PHILZ RECOVERY
image

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
   ∆ NOW AFTER FLASHING RECOVERY U CAN FLASH ANY CUSTOM ROM WHICH IS AVAILABLE FOR UR DEVICE.

∆HOW TO FLASH CUSTOM ROM:-
  * DOWNLOAD ROM FOR UR DEVICE.
THEN PUT THAT ROM ZIP IN SD CARD.
image

NOW REBOOT TO RECOVERY
MAKE BACKUP OF UR STOCK ROM
AFTER BACKUP COMPLETED NOW DO WIPE FACTOR DATA RESET
WIPE CAECHE
WIPE DALVIK CAECHE
THEN CHOOSE INSTALL ZIP FROM SD CARD.
CHOOSE ROM ZIP AND FLASH IT
FIRST BOOT WILL TAKE TIME.SO KEEP PATIENCE.

∆IF U DO NOT WANT TO FLASH CUSTOM ROM IN UR DEVICE AND WANT TO CUSTOMIZE UR STOCK ROM THEN U CAN USE XPOSED FRAMEWORK AND MODULES TO CUSTOMIZE UR STOCK ROM LOOK AND FEATURES LIKE CUSTOM ROM.
    ####guide on how to use xposed framework and module will be posted soon.

ƥ WHAT IS CUSTOM ROM:-
   *IT IS ALSO REPLACEMENT OF UR STOCK ROM TO ADVANCE ROM.
CUSTOM ROM IS BASICALLY OTHER DEVICE’S UI OR OS AND THAT IS PORTED OR BUILD BY DEV.COMMUNITY TO UR DEVICE.
IT MEANS U CAN USE ANY OS OF ANY DEVICE AFTER PORTING THAT OS TO UR DEVICE.
U CAN UPGRADE UR PHONE TO KITKAT TO LOLLIPOP OR JB TO KITKAT VIA CUSTOM OS.
SOME FAMOUS CUSTOM ROMS ARE
CYANOGEN MOD, MIUI, LEWA, AICP, PACMAN, VIBE.ETC.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
∆TOP APPS WHICH U HAVE TO USE AFTER ROOT UR DEVICE:-
*ES FILE EXPLORE (u can also use this app without root)
*:ROM TOOL BOX PRO
*GREENIFY
*REBOOTER
*RASHR
*MOBILE UNCLE TOOL
*GRAVITY BOX(need xposed framework)
*SCR RECORDER
*ROOT EXPLORER
*WPS CONNECTER
*WPA WPS TESTER
*HK THEMER(need xposed framework)
*TERMINAL EMULATOR
*HI FONT
*DROID EDIT PRO
*920 TXT EDITOR
*Z1 ARCHIEVER
*TITANIUM BACKUP
*LUCKY PATCHER
*FREEDOM
*XMOD
##### and still counting… List will be updated with more apps.
MANY APPS IN THIS LIST IS FOR PRO USERS.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
∆CHANGE SOUND MODS AFTER ROOT:-
  *YES ..IF U FEEL UR STOCK MUSIC FX IS TOTALLY WORST THEN U CAN CHANGE UR SOUND MOD OF UR DEVICE LIKE PREMIUM DEVICE AND QUALITY.

∆HOW TO DO:-
  *THIS NEED CUSTOM RECOVERY INSTALLED IN UR DEVICE.
THEN U HAVE TO DOWNLOAD SOUND MOD ZIP FILES IN UR DEVICE AND PUT IT IN SD CARD.
NOW REBOOT TO RECOVERY AND CHOOSE INSATLL ZIP OPTION AND SELECT THAT SOUND MOD ZIP AND FLASH IT.
DONE NOW REBOOT AND ENJOY.

∆ AVAILABLE SOUND MODS:-
   *DOLBY_ATOMS
    *DOLBY_DIGITAL_PLUS
    *VIPER4ANDROIDFX
     *SONY_WALKMAN
      *BEATS_AUDIO
*MAXX_AUDIO
                ###must download uninstaller
                  Zip if available because if
                u don’t these u can easily
                 uninstall it.
              ### make backup of ur stock
                 ROM before flashing anything

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
∆NOW A DAYS MANY ANDROID KERNEL TWEAKER SCRIPTS ALSO AVAILABLE FOR ROOTED DEVICE WHICH CAN INCREASE UR DEVICE’S OVER ALL PERFORMANCE.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

∆WHAT IF ANYTHING GOES WRONG:-
   * YES ALL COINS HAVE TWO SIDES
SO IF ROOTING IS BENEFICIAL THEN IT ALSO HAS SOME RISKS LIKE
BRICKING DEVICE
IMEI LOST ……..ETC.
SO PREVENTION IS BETTER THAN CURE. THATS WHY BEFORE DOING ANYTHING WITH UR DEVICE
MUST TAKE BACKUP OF UR STOCK ROM VIA (MTK DROID TOOL) IN PC
AND ALSO MAKE BACKUP OF UR ROM VIA CUSTOM RECOVERY.
BUT SOMEHOW U BRICKED UR DEVICE OR LOSTED UR IMEI THEN HERE IS WAY TO RECOVER AND REVIVE UR PHONE BACK.↓

***INSTALL SP FLASH TOOL IN UR PC.
* THEN INSTALL ADB USB DRIVERS FOR UR DRVICE IN UR PC.
           ####it is necessary because via adb drivers ur phone can connect to sp tool. If u get error then reinstall drivers.

Ʀ DOWNLOAD LINKS:-
         *SP_FLASH_TOOL_ALL_VERSIONS
           *ADB_DRIVERS

∆HERE IS FULL STEP BY STEP GUIDE
     ABOUT HOW TO USE SP TOOL AND FLASH STOCK ROM:-

Step 1: Download and install Android USB Drivers on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).
image

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:
image

Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#6).
image

Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.
image

Step 7: In the Download Tab, now click on the scatter-loading button.
image

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder).
image

Step 9: Now, Click on the Download Button to begin the Flashing Process.
image

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.
image

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.
                          

SO OVERALL ROOTING WORLD IS AWESOME AND U WILL MESMERIZED AFTER ENTERING IN THIS WORLD.
MANY BEGINNERS FEEL NERVOUS
FROM ENTERING IN THIS WORLD.
THATS WHY I MAKE THIS GUIDE.
THIS WILL TEACH U HOW AND WHAT TO DO ROOT AND AFTER ROOT.
DON’T WORRY EVERYTHING IS NEW BEFORE IT BECAME OLD.

∆THIS GUIDE IS STILL IN BETA STATE AND STILL NEED MANY IMPROVEMENT SO UR FEEDBACK NEEDED.
PLZZ COMMENTS UR VALUABLE POINTS THEN I CAN MAKE CHANGES IN THIS GUIDE.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Ʀ IF U LIKE OUR WORK AND PASSION THEN PLZZ SUPPORT US.
YOUR SUPPORT WILL MAKE STRONGER AND GIVE ENERGY TO DO ALWAYS NEW THINGS FOR ALL OF U.

SO PLZZ SHARE US AND LIKE OUR OFFICIAL FACEBOOK PAGE↓
                                                  ↓
[LINK:-HUBO.inc_facebook_page]

         

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
{THANK U FOR VISITING ON ©HUBO.inc™}
KEEP VISITING.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
ALL RIGHTS RESERVED TO HUBO.inc
                [©HUBO.inc™]

JOIN VIKRAM VA ON FACEBOOK
[LINK:-VIKRAM_VA_FACEBOOK]

==============================
                       ©HUBO.inc™😜
image

     

6 thoughts on “ROOT AND AFTER ROOT GUIDE FOR ANDROID[ MTK PHONES]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s